AG B01

Substrate type
Walls and ceilings made of gypsum, ceramic, silicate and concrete as well as cellular concrete components. Gypsum, cement, cementlime and lime plasters, gypsum boards.

Substrate preparation
Substrate should be clean, dry, stable and sound. Remove remains of paint and other contamination. Open scratches and cracks. Moisten absorbing substrates with water, if necessary. Protect all steel components (frames, conduits, barriers etc.) from direct contact with gypsum, due to its corrosive action.

Instructions for use
Stir the bag contents manually or mechanically with specified amount of clean and cold water to bring the mixture to homogenous and required consistency. Always pour dry mix into the water. Apply on prepared substrate with a stainless steel float or a putty knife. Prepare such amount of mix that can be used up within 5 minutes. Unused hardening mix cannot be mixed with water again. Throw it away.

Tools
Low-speed electric mixer, basket mixer, container, stainless steel float, putty knife, trowel.

Working conditions
Work in ambient temperatures between +5°C and +30°C. Do not add any other agents. Use clean containers and tools for each mixing. Protect freshly applied gypsum from moisture.

Storage
Store in original, unopened packages in dry place – shelf life 6 months from production date. Protect from moisture during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (20±2)°C and relative air humidity of (65±5)%. The workability may alter in different conditions. Appropriate eye, respiratory system and skin protection measures should be used. Becomes neutral after mixing with water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep away from children. Clean fresh stains with water. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Work according to building practice, observing health & safety standards and regulations.