AM 810START

Substrate type
Gypsum, cement, cement-lime and lime plasters, gypsum boards, dispersion and oil paint coats as well as concrete substrates.

Substrate preparation
The substrate should be cured, clean, dry, stable and sound. Remove remains of paint and other contamination. Large chipped areas should be patched with ALPOL AZ 135 levelling mortar. Treat loose or low-absorbing substrates with ALPOL AG 700 deep-penetrating primer. Patch small cracks and scratches with a thin coat of the product. Bubbles in concrete and very coarse plaster surfaces should be filled thoroughly.

Instructions for use
Spread the product with a stainless steel float to form a layer between 1 and 2 mm thick, until smooth and regular finish is achieved Apply the second coat after the first one has dried out. After the second coat has dried out, grind all irregularities with sand paper or a grinding mesh. Unused product can be used later, if stored in a tightly closed container.

Tools
Low-speed electric mixer, basket mixer, finish coat application unit, stainless steel floats, putty knife, trowel, hand sander with mesh or sandpaper.

Working conditions
Work in ambient and substrate temperatures between +5°C and +25°C. Low temperatures and high air humidity prolong the drying time. Do not allow the fresh finish coat to dampen or dry excessively. It is important to provide good ventilation in the area.

Storage
In original, not damaged, tightly closed containers in temperature between +5°C and +25°C – shelf life 12 months from production date. Tightly close the container after its opening. Protect from frost during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (23±2)°C and relative air humidity of (50±5)%. The workability and technical properties may alter in different conditions Wear safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin by using protective clothing and gloves. Keep away from children. Use water to remove fresh dirt or ALPOL AI 770 cleaner to remove hardened dirt. The manufacturer assumes no liability for damage resulting from improper or inappropriate use of the product.

General recommendations
Always follow good building practices, observing health & safety standards and regulations.