AG 707

Substrate type
To prime silicate and mineral decorative plasters, cement-lime and gypsum plasters, walls made of ceramic, silicate, gypsum or cellular concrete components. Old, chalked, brittle and loose mineral substrates. Concrete substrates, screeds, levelling mortars.

Substrate preparation
New plaster work, concrete and other substrates should be set and seasoned. Remove old, loose and peeling material of poor adhesion. Do not use on organic paint or plaster work (acrylic, oil etc.). Chipped areas and irregularities should be patched with ALPOL AZ 130 quick setting mortar or ALPOL AZ 135 levelling mortar.

Instructions for use
Carefully mix the primer before application. Apply uniformly on the surface with a brush or a masonry brush. Do not thin with water. In case of highly absorbing surfaces repeat priming.

Tools
Brush, masonry brush, container.

Working conditions
Work in ambient and substrate temperatures between +5°C and +30°C. Do not add any other agents to the preparation. Protect freshly applied primer from excessive moisture and rain.

Storage
Store in original, unopened packages – shelf life 12 months from production date. Protect from freezing and overheating during transport and storage.

Notes
The specifications and instructions for use are given for the temperature of (20±2)°C and relative air humidity of (65±5)%. The drying time may alter in different conditions. Wear safety goggles. Contains liquid glass. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin. Use protective clothing and gloves. Keep away from children. Aggressively reacts with timber, metal and glass. Provide special protection for those materials. Use water for cleaning tools. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.

General recommendations
Work according to building practice, observing manufacturer’s instructions as well as health & safety standards and regulations.